Buying a used bike: Honda 599

In June 2012, I bought a new-to-me Honda 599, roughly one week after finding out they’d been sold in the U.S. for two years. In The Rest of the World, it’s called a Honda Hornet 600. Here, it’s the 599, because, supposedly, somehow the old AMC Hornet has a permanent claim on the name. For behind-the-scenes clarity, Honda designates this model as a CB600F, so let’s just go with that. In Honda-speak, CB usually means standard seating position, which is true of this bike.

2004 Honda 599The bike was essentially as advertised: the second owner’s cousin had promised he knew how to ride, then promptly augured the bike into the earth, damaging a few things on the left side. Nothing serious. But every used bike needs treatment before it’s “right.”

A short list, for an eight-year-old motorcycle with just 11,376 miles on it:

And after putting the new chain on, I decided I’d rather have new sprockets than keep the old ones for much longer. Another $60 in parts (retail price) and about an hour of labor. Could have saved some time doing it with the rear tire change.

Further examination revealed old damage to the right side of the bike, perhaps from the previous-previous owner. I opted to replace three bolts that suffered the worst damage, along with the brake pedal, which I’d originally thought was just badly adjusted. In addition, the coolant hose sprung a pinhole leak at around 200 degrees, so that was replaced, along with the decorative/protective spring over it.

As long as I was ordering a batch of Honda OEM parts, I also decided to add their “sport screen.” I’d noticed at highway speeds that the wind was doing a good job of pulling my arms out. The small windshield Honda sells did an excellent job of increasing comfort at 70mph, and it doesn’t ruin the looks of the bike.

And then in the process of riding it, I discovered the bike hid a fatal flaw: Every time I rode it, I ended up stinking of exhaust fumes. Low speed, high speed, didn’t matter. I considered various ways to remedy the problem, then decided to sell it instead, after about nine months and 2,000 miles. Funny how one detail like that can scuttle the whole machine. Besides, I needed an incentive to finish my VFR800.

by Andrew | December 28, 2013 at 11:58 pm | Outside Work | 3 comments

«
»

3 Responses to “Buying a used bike: Honda 599”

  1. Peter says:

    My FJ1100 was similar after I extended the windshield a bit higher and wider. I noticed the wind pushing me forward a wee bit, never thought much about it until it slowly dawned on me, after many rides, that it was also bring a bit of the exhaust up with it.

    Liked the windshield and the less wind pressure, wasn’t too thrilled with exhaust fumes.

  2. Southwest cycle @Cape Carol says:

    Price of Honda 599 was US $7,400 in 2006. As your description you changed the oil, tires, Chains and brake fluid, but the main thing is the engine. Can you explain more about it. Like is there any damage or not.

    • Andrew says:

      Not sure what you’re looking for. I guess I could have titled this post a little better, but it’s just sharing my experience with this one bike. I sold it in late 2012.

Leave a Reply